CarPro Spotless 2.0 Water Spot Remover

Spotless paint is a beautiful thing, but it is difficult to maintain in a world of hard, mineral-laden water without constant polishing.

CARPRO Spotless chemically breaks down the mineral deposits left behind by water droplets (otherwise known as water spots) before they can etch into the finish, thus negating the need for time consuming abrasive correction, and prolonging the life of the paint. If left unattended, water spotting can cause permanent damage to the most resilient of vehicle surfaces, including automotive clear coat, brightwork trim, and glass! Even sealants and coatings are not fully impervious to some harsh mineral deposits and can benefit from periodic chemical water-spot removal to keep them at the peak of their functional and aesthetic performance. Spotless contains a proprietary blend of carefully balanced gentle acids that safely remove heavy mineral deposits on most vehicle surfaces, and can even be used to help maintain our CQUARTZ line of nanotechnology coatings. If you're looking for a fast and efficient water-spot remover to dissolve unsightly bonded mineral contaminants from your car or motorcycle, CARPRO Spotless is the solution to your problems. 

Detailed Application Instructions:

First, wash and dry the vehicle to remove any surface grime or contaminants that could interfere with the performance of Spotless. Ensure that the vehicle is parked in the shade, and that the surface to be treated is cool to the touch. Start by shaking the bottle to integrate the active ingredients before spraying Spotless directly onto the surface, and working the product in thoroughly one panel at a time. Immediately wipe off the remaining product residue with a clean Microfiber Madness Crazy Pile, and rinse the surface thoroughly to neutralize the solution. Dry and inspect the surface, and repeat if any mineral deposits remain. If etching has occurred, polish the surface with CARPRO Reflect for painted finishes, or CeriGlass for glass before applying either Reload or Hydro2 for protection against future damage.

Apply Spotless in a well ventilated area, and wear chemical-resistant gloves and eye protection to avoid possible skin and eye irritation.

Features:

  • Advanced balanced-acid formula safely dissolves hard-water deposited mineral residues before etching can occur.
  • Developed to quickly remove damaging water spots.
  • Compatible and safe for use on clear coat and all CQUARTZ Nano-Coatings when used as directed.

Directions:

  1. Shake well.
  2. Spray on microfiber towel, sponge, or CARPRO applicator/suede.
  3. Work in the solution over the surface.
  4. Wipe off with MF, and remove residue with Ultima Waterless Wash or rinse well with water.
  5. Repeat steps 1-4 if necessary.
Visa Mastercard American Express PayPal Diners Club Discover

Spotless paint is a beautiful thing, but it is difficult to maintain in a world of hard, mineral-laden water without constant polishing.

CARPRO Spotless chemically breaks down the mineral deposits left behind by water droplets (otherwise known as water spots) before they can etch into the finish, thus negating the need for time consuming abrasive correction, and prolonging the life of the paint. If left unattended, water spotting can cause permanent damage to the most resilient of vehicle surfaces, including automotive clear coat, brightwork trim, and glass! Even sealants and coatings are not fully impervious to some harsh mineral deposits and can benefit from periodic chemical water-spot removal to keep them at the peak of their functional and aesthetic performance. Spotless contains a proprietary blend of carefully balanced gentle acids that safely remove heavy mineral deposits on most vehicle surfaces, and can even be used to help maintain our CQUARTZ line of nanotechnology coatings. If you're looking for a fast and efficient water-spot remover to dissolve unsightly bonded mineral contaminants from your car or motorcycle, CARPRO Spotless is the solution to your problems. 

Detailed Application Instructions:

First, wash and dry the vehicle to remove any surface grime or contaminants that could interfere with the performance of Spotless. Ensure that the vehicle is parked in the shade, and that the surface to be treated is cool to the touch. Start by shaking the bottle to integrate the active ingredients before spraying Spotless directly onto the surface, and working the product in thoroughly one panel at a time. Immediately wipe off the remaining product residue with a clean Microfiber Madness Crazy Pile, and rinse the surface thoroughly to neutralize the solution. Dry and inspect the surface, and repeat if any mineral deposits remain. If etching has occurred, polish the surface with CARPRO Reflect for painted finishes, or CeriGlass for glass before applying either Reload or Hydro2 for protection against future damage.

Apply Spotless in a well ventilated area, and wear chemical-resistant gloves and eye protection to avoid possible skin and eye irritation.

Features:

  • Advanced balanced-acid formula safely dissolves hard-water deposited mineral residues before etching can occur.
  • Developed to quickly remove damaging water spots.
  • Compatible and safe for use on clear coat and all CQUARTZ Nano-Coatings when used as directed.

Directions:

  1. Shake well.
  2. Spray on microfiber towel, sponge, or CARPRO applicator/suede.
  3. Work in the solution over the surface.
  4. Wipe off with MF, and remove residue with Ultima Waterless Wash or rinse well with water.
  5. Repeat steps 1-4 if necessary.

Spotless paint is a beautiful thing, but it is difficult to maintain in a world of hard, mineral-laden water without constant polishing.

CARPRO Spotless chemically breaks down the mineral deposits left behind by water droplets (otherwise known as water spots) before they can etch into the finish, thus negating the need for time consuming abrasive correction, and prolonging the life of the paint. If left unattended, water spotting can cause permanent damage to the most resilient of vehicle surfaces, including automotive clear coat, brightwork trim, and glass! Even sealants and coatings are not fully impervious to some harsh mineral deposits and can benefit from periodic chemical water-spot removal to keep them at the peak of their functional and aesthetic performance. Spotless contains a proprietary blend of carefully balanced gentle acids that safely remove heavy mineral deposits on most vehicle surfaces, and can even be used to help maintain our CQUARTZ line of nanotechnology coatings. If you're looking for a fast and efficient water-spot remover to dissolve unsightly bonded mineral contaminants from your car or motorcycle, CARPRO Spotless is the solution to your problems. 

Detailed Application Instructions:

First, wash and dry the vehicle to remove any surface grime or contaminants that could interfere with the performance of Spotless. Ensure that the vehicle is parked in the shade, and that the surface to be treated is cool to the touch. Start by shaking the bottle to integrate the active ingredients before spraying Spotless directly onto the surface, and working the product in thoroughly one panel at a time. Immediately wipe off the remaining product residue with a clean Microfiber Madness Crazy Pile, and rinse the surface thoroughly to neutralize the solution. Dry and inspect the surface, and repeat if any mineral deposits remain. If etching has occurred, polish the surface with CARPRO Reflect for painted finishes, or CeriGlass for glass before applying either Reload or Hydro2 for protection against future damage.

Apply Spotless in a well ventilated area, and wear chemical-resistant gloves and eye protection to avoid possible skin and eye irritation.

Features:

  • Advanced balanced-acid formula safely dissolves hard-water deposited mineral residues before etching can occur.
  • Developed to quickly remove damaging water spots.
  • Compatible and safe for use on clear coat and all CQUARTZ Nano-Coatings when used as directed.

Directions:

  1. Shake well.
  2. Spray on microfiber towel, sponge, or CARPRO applicator/suede.
  3. Work in the solution over the surface.
  4. Wipe off with MF, and remove residue with Ultima Waterless Wash or rinse well with water.
  5. Repeat steps 1-4 if necessary.

Seems like you're in . (This is our US/CA store)

Would you like to go to our store?